# Gate Valve Parts and Functions: A Buyer&#8217;s Guide

## **Quick Answer**

Gate valve parts usually include the body, bonnet, gate, seats, stem, packing, stem nut, yoke, and operator. The body and bonnet contain pressure; the gate opens or closes the flow path; the seats form the sealing surfaces; and the stem, packing, and operator transmit movement while keeping process fluid inside. Part names are similar across designs, but wedge, flat, and bellows-sealed construction change how those parts work. Confirm the exact internal arrangement, materials, and spare-parts list before ordering.

Two valves can share component names yet differ in gate, seat, bonnet joint, and stem seal—choices that affect containment, isolation, operation, and maintenance.

## What Are the Main Gate Valve Parts?

A gate valve has a pressure boundary, a closing member, sealing surfaces, and an operating train. The table lists the usual parts.

PartMain functionWhat buyers should confirmBodyContains pressure and forms the flow pathMaterial, class, connection, boreBonnetCloses the body and supports the stem assemblyJoint type, gasket, materialGate or discMoves across the seats to stop flowWedge or flat, solid or flexible, trimSeatProvides the sealing contact surfaceIntegral, renewable, or floating; hardfacingStemTransmits operator movement to the gateRising or non-rising, T-head, material and treatmentPacking and glandSeals the stem through the bonnetPacking type, temperature, adjustmentStem nutConverts rotation into stem travelThread, material, lubrication, accessYoke and operatorSupports and drives the stemHandwheel, gear, chainwheel, or actuatorBack seatProvides a secondary stem seal when fully openDesign, condition, service limits

## How Do the Body and Bonnet Contain Pressure?

The body forms the pressure boundary and pipe connection, and guides flow toward the gate and seats. Material, wall thickness, pressure class, and end connection must match the line and design standard.

The bonnet closes the body around the stem. Bolted bonnets use a gasket and fasteners; pressure-seal bonnets use internal pressure to load the seal. The [PANS wedge gate valve range](https://www.pansvalve.com/products/wedge-gate-valve/) lists Class 150–900 as usually bolted-bonnet and Class 1500–2500 as usually pressure-seal—product-family guidance, not universal practice. Confirm the joint, gasket, bolting, and material.

## What Does the Gate Do, and Why Do Wedge and Flat Designs Differ?

The gate, or disc, is the closing member. It crosses the flow path and seats against two surfaces. Gate valves isolate flow; a partly open gate can erode seats and cause vibration.

A wedge gate loads against the seats when closed. Solid and flexible wedges distribute load differently. PANS lists flexible wedges for NPS 2 and larger and solid wedges below NPS 2—a published product split, not a rule for every manufacturer.

Wedge Gate Valve

API 600 design with API 598 inspection/testing, and flexible or solid wedge options. Confirm trim, packing, and actuation for the duty.

[View Wedge Valve](https://www.pansvalve.com/products/wedge-gate-valve/)[![Silver flanged gate valve with a blue handwheel, bolted bonnet and raised stem, bearing visible markings including PANS, 2, 150 and CF8.](https://www.pansvalve.com/wp-content/uploads/2022/04/1.jpg)![Two blue-gray sectional diagrams compare a WEDGE GATE with a tapered closing member and a FLAT GATE with a parallel closing member; a note reads Conceptual section view — not to scale.](https://www.pansvalve.com/wp-content/uploads/2022/04/1.jpg" style="width:100%;height:100%;object-fit:cover;display:block"&gt;](https://www.pansvalve.com/products/wedge-gate-valve/)

A flat gate uses a parallel plate and seats. The [PANS flat gate valve design](https://www.pansvalve.com/products/flat-gate-valve/) uses floating seat rings with O-rings and preload for bidirectional sealing—a compact, parallel-seat option.

Do not assume full bore or piggability. Confirm bore, internal steps, seat geometry, and passage drawing against the cleaning tool.