# Butterfly Valve Types: How to Choose the Right Design

## **Quick Answer**

Butterfly valve types are usually grouped by body geometry: concentric, double-offset, and triple-offset. That describes how the disc moves and meets the seat, not how the valve performs. Seat material, pressure and temperature, differential pressure, closure tightness, cycle frequency, and end connection decide the specification. Start with the service, then choose the geometry.

## Why Are Butterfly Valve Types So Often Confused?

The same valve can be described several ways, and the terms overlap. &#8220;High-performance&#8221; is a commercial family label, not a geometry. &#8220;Metal-seated&#8221; describes the sealing interface, not the offset. &#8220;Triple-offset&#8221; describes disc and seat geometry, yet a triple-offset valve may use a composite seal rather than an all-metal seat.

That matters when quoting: a request for a &#8220;triple-offset metal-seated valve&#8221; may return a composite-seal design that meets the geometry but not the sealing duty. Define the service first — medium, size and connection, pressure and temperature, differential pressure, closure tightness — then body and seat geometry. Actuation follows once torque is known.

## What Are the Main Butterfly Valve Types?

Industrial butterfly valves fall into three structural families. Each moves the disc differently relative to the seat, which sets friction, sealing behaviour, and maintenance.

### When should you choose a concentric, resilient-seated valve?

In a concentric design, the stem passes through the disc centre and the disc sits centrally in the body. When closed, the disc presses into an elastomer liner or seat around the full circumference, so the valve seals in either direction.

This is the general-purpose type for water, HVAC, cooling circuits, and utilities: compact, light, and usually the lowest-cost option. The resilient seat closes tightly at modest differential pressure, which suits isolation rather than severe throttling.

Its limits come from the seat material. Elastomers have a narrower temperature range than PTFE or metal and can swell or harden in aggressive media; abrasive solids can damage the seat edge. For clean water at moderate temperature those limits rarely matter. For steam, solvents, or hot oil, they usually do.

### When is a double-offset, high-performance valve the better fit?

A double-offset valve moves the stem away from the disc centre and away from the seat plane. The first offset puts the shaft behind the disc centre; the second tilts the seat cone relative to the shaft. As the disc opens, it lifts off the seat within the first few degrees, so the sealing surfaces separate before the disc rotates across them.

That reduces rubbing and extends seat life in services that cycle often. It also allows a PTFE or RPTFE seat instead of an elastomer, widening the temperature and chemical range while keeping a soft-seat closure.

PANS describes its [high-performance butterfly valve range](https://www.pansvalve.com/products/high-performance-butterfly-valve/) with double or triple eccentric geometry, an RPTFE seat, and wafer, lug, or flanged connections. The data sheet, not the family name, should be the reference.

High Performance Butterfly Valve

Double or triple eccentric design with RPTFE seat and wafer, lug, or flanged ends. Check temperature and differential pressure against the quoted data sheet.

[View Valve Data](https://www.pansvalve.com/products/high-performance-butterfly-valve/)[![A black butterfly valve topped with a silver rectangular actuator, featuring a silver circular disc with stamped markings.](https://www.pansvalve.com/wp-content/uploads/2024/09/High-Performance-Butterfly-Valve.png)![Black butterfly valve with a large handwheel and gear actuator above a circular flanged body, showing the valve disc inside.](https://www.pansvalve.com/wp-content/uploads/2024/09/High-Performance-Butterfly-Valve.png" style="width:100%;height:100%;object-fit:cover;display:block"&gt;](https://www.pansvalve.com/products/high-performance-butterfly-valve/)

This type suits moderate pressure and temperature where a soft seat is acceptable: process water, some hydrocarbons, steam condensate, and utility isolation. It fits when a concentric valve lacks temperature headroom but a full metal seat is not justified. Check the polymer seat against the actual medium.

### When does a triple-offset, metal-seated valve justify the cost?

A triple-offset valve adds a third offset: the seat cone axis is inclined relative to the flow axis. The disc swings into the seat only at the end of the closing stroke, so there is almost no sliding contact during travel. Closure comes from geometry and seating force, not an elastomer compressed against the disc. It is used for higher temperature, higher pressure, and more demanding isolation: steam, heat-transfer oil, refinery, petrochemical, and power applications where a polymer seat would fail.

PANS lists a [three-eccentric metal hard-seal design](https://www.pansvalve.com/products/three-eccentric-metal-hard-seal-butterfly-valve/) with replaceable seat and seal rings. Its seal ring is described as a composite of stainless steel, graphite, carbon fibre, and PTFE — a composite seal, not a homogeneous metal seat. PANS also lists a separate [full metal-seated bidirectional butterfly valve](https://www.pansvalve.com/products/full-metal-seated-bi-directional-butterfly-valve/) with hardfaced metal-to-metal disc and seat rings.

Three-Eccentric Metal Hard Seal Butterfly Valve

Three-eccentric geometry with composite seal ring and replaceable seat ring; frictionless sealing is described for this range. Confirm the seat construction for your medium.

[Review Seat Design](https://www.pansvalve.com/products/three-eccentric-metal-hard-seal-butterfly-valve/)[